Control group /:
-.slice
├─sys-fs-fuse-connections.mount 
├─sys-kernel-config.mount 
├─sys-kernel-debug.mount 
├─dev-mqueue.mount 
├─user.slice 
│ ├─user-1002.slice 
│ │ ├─user@1002.service …
│ │ │ ├─app.slice 
│ │ │ └─init.scope 
│ │ │   ├─21368 /lib/systemd/systemd --user
│ │ │   └─21369 (sd-pam)
│ │ └─session-22.scope 
│ │   ├─21365 sshd: cephadm [priv]
│ │   └─21390 sshd: cephadm@notty
│ └─user-1000.slice 
│   ├─user@1000.service …
│   │ ├─app.slice 
│   │ └─init.scope 
│   │   ├─702 /lib/systemd/systemd --user
│   │   └─703 (sd-pam)
│   ├─session-4.scope 
│   │ ├─1470 sshd: zuul [priv]
│   │ └─1483 sshd: zuul@notty
│   └─session-1.scope 
│     ├─   699 sshd: zuul [priv]
│     ├─   716 sshd: zuul@notty
│     ├─   861 /usr/bin/python3
│     ├─  1474 ssh: /home/zuul/.ansible/cp/199.19.213.139-22-zuul [mux]
│     ├─105284 sh -c /bin/sh -c 'sudo -H -S -n  -u root /bin/sh -c '"'"'echo BECOME-SUCCESS-nzevsvupkmnjphecsixcxybivqahfzpa ; /usr/bin/python3'"'"' && sleep 0'
│     ├─105285 /bin/sh -c sudo -H -S -n  -u root /bin/sh -c 'echo BECOME-SUCCESS-nzevsvupkmnjphecsixcxybivqahfzpa ; /usr/bin/python3' && sleep 0
│     ├─105286 sudo -H -S -n -u root /bin/sh -c echo BECOME-SUCCESS-nzevsvupkmnjphecsixcxybivqahfzpa ; /usr/bin/python3
│     ├─105287 /bin/sh -c echo BECOME-SUCCESS-nzevsvupkmnjphecsixcxybivqahfzpa ; /usr/bin/python3
│     ├─105288 /usr/bin/python3
│     ├─105296 /bin/bash -c set -x
systemd-cgls --full --all --no-pager > /tmp/logs/system/systemd-cgls.txt
ip addr > /tmp/logs/system/ip-addr.txt
ip route > /tmp/logs/system/ip-route.txt
lsblk > /tmp/logs/system/lsblk.txt
mount > /tmp/logs/system/mount.txt
docker images > /tmp/logs/system/docker-images.txt
brctl show > /tmp/logs/system/brctl-show.txt
ps aux --sort=-%mem > /tmp/logs/system/ps.txt
dpkg -l > /tmp/logs/system/packages.txt
CONTAINERS=($(docker ps -a --format '{{ .Names }}' --filter label=zuul))
if [ ! -z "$CONTAINERS" ]; then
  mkdir -p "/tmp/logs/system/containers"
  for CONTAINER in ${CONTAINERS}; do
    docker logs "${CONTAINER}" > "/tmp/logs/system/containers/${CONTAINER}.txt"
  done
fi
│     └─105305 systemd-cgls --full --all --no-pager
├─sys-kernel-tracing.mount 
├─init.scope 
│ └─1 /lib/systemd/systemd --system --deserialize 42 nofb
├─system.slice 
│ ├─docker-7b2707cd823fcdcfb5e326a1f87866bd6afb901774eec6c24ddaf39b08ee4b9e.scope …
│ │ ├─28953 /sbin/docker-init -- /usr/bin/ceph-osd -n osd.1 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ └─28965 /usr/bin/ceph-osd -n osd.1 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ ├─containerd.service …
│ │ ├─ 9851 /usr/bin/containerd --config /etc/containerd/config.toml
│ │ ├─12243 /usr/bin/containerd-shim-runc-v2 -namespace moby -id 1cfb53e45e80dcd210126e482b33e7b0cdc5420257b1eaf3198d714b752544be -address /run/containerd/containerd.sock
│ │ ├─12623 /usr/bin/containerd-shim-runc-v2 -namespace moby -id f9eb1e9e3125efa707c6e8fea5e5d16dfb97399aaa614fc2dc633e8e82b99ae3 -address /run/containerd/containerd.sock
│ │ ├─19315 /usr/bin/containerd-shim-runc-v2 -namespace moby -id 000d1c031cb52d85572b3ba4003fee132631e7186d2d61112ad241a30f3940f4 -address /run/containerd/containerd.sock
│ │ ├─24510 /usr/bin/containerd-shim-runc-v2 -namespace moby -id fe20607cee8887cac988025c471cd645162469c0457bd2c92e7428be9aae416f -address /run/containerd/containerd.sock
│ │ ├─28929 /usr/bin/containerd-shim-runc-v2 -namespace moby -id 7b2707cd823fcdcfb5e326a1f87866bd6afb901774eec6c24ddaf39b08ee4b9e -address /run/containerd/containerd.sock
│ │ ├─33719 /usr/bin/containerd-shim-runc-v2 -namespace moby -id 2a3c951184870c0fa88ba87efae474ac9f9fb9aa602a12a75ed429b2e53b2bbf -address /run/containerd/containerd.sock
│ │ ├─39202 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id f52062546990d9b9bcf91e731ccc9d9d7a6763f9288aac13ab365e7204a61901 -address /run/containerd/containerd.sock
│ │ ├─39242 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 7a02c72326bc1d0d8ce24974ec227257b79f078b4e6ce29b2351940891973764 -address /run/containerd/containerd.sock
│ │ ├─39277 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id fc4b62fbba66a03b9bdf457483f219429922a99ccceacb6353cb92783bd25a53 -address /run/containerd/containerd.sock
│ │ ├─39278 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id c83d9f6157d1aa2ecca597ca9b20214acd4887b5b885fdbdb916473ad2a8b460 -address /run/containerd/containerd.sock
│ │ ├─39280 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id a3e650c0cc795aaae413b91569350872428449efd38102ec7929add55658e056 -address /run/containerd/containerd.sock
│ │ ├─39836 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 72385d0efddfbe571c7811bbdb2b7216b03ff950aaa50ffa1d251fdab2afa387 -address /run/containerd/containerd.sock
│ │ ├─40548 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id f43c8826072e827efedfdd227b0eaf70df06ac9dde9e16dae1566b42fffba983 -address /run/containerd/containerd.sock
│ │ ├─40570 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id b3b5f1e760552655072f18982c59c0142010474d5acf1b57118b27b7ee974e7a -address /run/containerd/containerd.sock
│ │ ├─41917 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 55027d676e775c461a5bc89488e34d71b8cff94fa7a1632b9a701d51cee5e3dc -address /run/containerd/containerd.sock
│ │ ├─42312 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 620a0dcc15ac92c68b149f0a8347405cc87f3c87c16dfab723981a8b21fe5ff5 -address /run/containerd/containerd.sock
│ │ ├─42348 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 76c4dd723916088446081af8e509d918d42accab6345f0ac3c03a1b69a31cb6a -address /run/containerd/containerd.sock
│ │ ├─42793 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 472d09ce99b11554934c8a35e62f96c5e6db89b8d2cae053d3ec1eb5799b5604 -address /run/containerd/containerd.sock
│ │ ├─43279 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id b6d52baa7ee89b97ef6db355b1bbc481baf6e111bce595469a9e8b9792aadfcf -address /run/containerd/containerd.sock
│ │ ├─43321 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id ee1295e7979de886a48e06bd81cd8d24c87581f768f8bc4ada485267e7f535ca -address /run/containerd/containerd.sock
│ │ ├─43369 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4664855e2284d11fbdb1c3924d998d50933034311267af0b7ae1c6a52f9af66a -address /run/containerd/containerd.sock
│ │ ├─45332 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3f323201f40f1d72bcafdf4c648b4bab704fdaa23e510cbc7f02ac4b78b21012 -address /run/containerd/containerd.sock
│ │ ├─45451 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 055dbe730f95ed58e2aa50418388541cd87145e3dfcc8d98d805de285713995c -address /run/containerd/containerd.sock
│ │ ├─46236 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 6217cf7aaca81c9cc36ab8b6738d6d844cfbe164481037355e21ec821b169d79 -address /run/containerd/containerd.sock
│ │ ├─46275 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 8a42a81987005df435694a2194654793722ec90b8468165cb814a963741dd1c7 -address /run/containerd/containerd.sock
│ │ ├─46657 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id edf7a59f7a04c41e7ea3d9c3d71a774310dccfa4543b28a17c725a156042e639 -address /run/containerd/containerd.sock
│ │ ├─47152 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id dfd66d845926a8d5edc6d081a00c08614e4c7947bf8e68776cd56bca1ae21acf -address /run/containerd/containerd.sock
│ │ ├─47550 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 72c7b72cb229e6126b519d74e77445716c3413bf6e023b26e7105960d2258991 -address /run/containerd/containerd.sock
│ │ ├─49408 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id acbbde53118ff708c9e897d6f511c58f753f9a1824ae232e8c4160a80376aba6 -address /run/containerd/containerd.sock
│ │ ├─52920 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id dc82300ea638e307a88819fb596e60c4e498364a92d2289a9f2e02b341dc04c1 -address /run/containerd/containerd.sock
│ │ ├─53528 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id ccb52d6199cdd913db1e9a715511f20d99e96b84c41e5da351aaa5baa552e1ae -address /run/containerd/containerd.sock
│ │ ├─53566 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id f1cf33a541a5dd9989993498e512cc5dcfdbe032cf63b58994118c7658af81ee -address /run/containerd/containerd.sock
│ │ ├─53610 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id c33a972e68d620178a5bf49925e71f8736b46eb61e3f2d87c7f693003f5e4053 -address /run/containerd/containerd.sock
│ │ ├─53768 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 86249513b843543f8fb7e2d3fe0a15d31382be47aa497565cd96c0d2ae143605 -address /run/containerd/containerd.sock
│ │ ├─56411 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id cc08bfc163e77915c5ccd5c270acb19c45c7c1d0f02b4720090b25af441a000f -address /run/containerd/containerd.sock
│ │ ├─56506 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id ee7da190a3be0b39e25834b909c367505171b95941aeedfb96b0048a14a8f43f -address /run/containerd/containerd.sock
│ │ ├─56552 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id ece7f76be8429629f4329f9fb7d2a19406f82c14346cb2bc2553a06b2c0c514f -address /run/containerd/containerd.sock
│ │ ├─56592 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id f6e0c285f99bc0c6b83aec8cfd7f5f7f271bfe9226c6bd9fadefbc14d0f23ef3 -address /run/containerd/containerd.sock
│ │ ├─57805 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id e5e99e0fd5b128414f5e6a7691496bcfb0494c5d0bc4ab6fdd26354decff7021 -address /run/containerd/containerd.sock
│ │ ├─57967 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id f3d6855440ac802ce834ccee46e3d3e01a50e7c14c3817e398522ec800164f1f -address /run/containerd/containerd.sock
│ │ ├─58232 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 615164911db7c9f63eb7680024cd7a825eb23cbed9b7e2706685fa273496be2b -address /run/containerd/containerd.sock
│ │ ├─58284 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 22bd0477b5c65b994bb1c4bdf97578c4a524c1f215e7a86e2d9a1ba0b4b79d27 -address /run/containerd/containerd.sock
│ │ ├─58326 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 446462eec8e3086809eff69f7ee5a2f40772f4194fa8d4a44278aef88fa95d65 -address /run/containerd/containerd.sock
│ │ ├─58710 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id e782a99052fc98d02d5d672f5aabeb34bddb57277f7544b29ece884e3795e169 -address /run/containerd/containerd.sock
│ │ ├─59116 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id a97c3a937f69d0d04e42e34d3451cfd3bca67aa8762fbbb853ace8dc72439f0a -address /run/containerd/containerd.sock
│ │ ├─59437 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 7f8671060cb6f2469b7b09707ddabc59514c1fce84ba5a57146248eddfb33a18 -address /run/containerd/containerd.sock
│ │ ├─59598 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id cb21bfef33db7ee2daad2e949ec4a0b84ad496aecffb62a9dc6071a688446915 -address /run/containerd/containerd.sock
│ │ ├─60236 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 91d9c1a519a65986e12ad0567a4844ddda9b0ab176d4ec4358e23433f9603e94 -address /run/containerd/containerd.sock
│ │ ├─61360 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 900c2529a5268ae2b6d600f204a0d6696afc5d7142f80e3a99a49d7a1af12ea2 -address /run/containerd/containerd.sock
│ │ ├─63061 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id a1acaa762cc7c27dcb2f8d2aa2f93f788123a18fa532f88bee702973675dd703 -address /run/containerd/containerd.sock
│ │ ├─69468 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 6d876771513c0888a36f2fe1c40c6c6d8c1d80bb7e8e3f6c85520a0efbb77d3b -address /run/containerd/containerd.sock
│ │ ├─70322 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 8f76d9a115724cbce50dedc6f262fa22b76c6800d7020b2e5e25d385bd95a4dd -address /run/containerd/containerd.sock
│ │ ├─74524 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 06c2420e6845c87f6a16d5124a122104f16e1b554143757a2c50cb9ce57f75d3 -address /run/containerd/containerd.sock
│ │ ├─79326 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id a16bad40e453eafedb26bf6ee8b3605aecfded22ed0358b8bcb1f732ec4357d2 -address /run/containerd/containerd.sock
│ │ ├─84565 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id c852f5c870ee5bc52b4e02c1d87f121e98c763688a2bfa87b6ca4f2bd07496b4 -address /run/containerd/containerd.sock
│ │ ├─84610 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9a5924e594e7af1ad4426d9ecfc239323fde6c2d8ab5fc3cd37cbb28748e566f -address /run/containerd/containerd.sock
│ │ ├─95986 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 02f1ebe489511bde946cccfb855d4247498fd31392a7f9a54a92c3f31f159cb3 -address /run/containerd/containerd.sock
│ │ ├─97088 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 1c0f148db4554eca64caf854d6cb615fe6328c3dc04691a7ece5e6cd34433151 -address /run/containerd/containerd.sock
│ │ ├─97141 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 6cd69ca8a83096d2082984693ab11166c7e7ab5191d22988bc23d45f54cdd4d8 -address /run/containerd/containerd.sock
│ │ └─97707 /usr/bin/containerd-shim-runc-v2 -namespace k8s.io -id 8fc6e1b0afe11c4a010562497eb3b624ff3e4dcfd23c561538d589c718451151 -address /run/containerd/containerd.sock
│ ├─packagekit.service 
│ │ └─1186 /usr/libexec/packagekitd
│ ├─systemd-networkd.service 
│ │ └─521 /lib/systemd/systemd-networkd
│ ├─systemd-udevd.service 
│ │ └─391 /lib/systemd/systemd-udevd
│ ├─docker-000d1c031cb52d85572b3ba4003fee132631e7186d2d61112ad241a30f3940f4.scope …
│ │ ├─19344 /sbin/docker-init -- /usr/bin/ceph-crash -n client.crash.instance
│ │ └─19360 /usr/bin/python3 -s /usr/bin/ceph-crash -n client.crash.instance
│ ├─system-serial\x2dgetty.slice 
│ │ └─serial-getty@ttyS0.service 
│ │   └─630 /sbin/agetty -o -p -- \u --keep-baud 115200,57600,38400,9600 ttyS0 vt220
│ ├─system-ceph\x2d4837cbf8\x2d4f90\x2d4300\x2db3f6\x2d726c9b9f89b4.slice 
│ │ ├─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@osd.1.service 
│ │ │ ├─28648 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.1/unit.run
│ │ │ └─28912 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-osd --privileged --group-add=disk --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-osd-1 --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.1:/var/lib/ceph/osd/ceph-1:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.1/config:/etc/ceph/ceph.conf:z -v /dev:/dev -v /run/udev:/run/udev -v /sys:/sys -v /run/lvm:/run/lvm -v /run/lock/lvm:/run/lock/lvm -v /:/rootfs quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -n osd.1 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ ├─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@crash.instance.service 
│ │ │ ├─19270 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash.instance/unit.run
│ │ │ └─19293 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-crash --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-crash-instance --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash.instance/config:/etc/ceph/ceph.conf:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash.instance/keyring:/etc/ceph/ceph.client.crash.instance.keyring quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -n client.crash.instance
│ │ ├─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@mgr.instance.byaoym.service 
│ │ │ ├─12538 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mgr.instance.byaoym/unit.run
│ │ │ └─12568 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-mgr --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-mgr-instance-byaoym --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph:v18.2.7 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mgr.instance.byaoym:/var/lib/ceph/mgr/ceph-instance.byaoym:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mgr.instance.byaoym/config:/etc/ceph/ceph.conf:z quay.io/ceph/ceph:v18.2.7 -n mgr.instance.byaoym -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ ├─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@osd.0.service 
│ │ │ ├─24215 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.0/unit.run
│ │ │ └─24492 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-osd --privileged --group-add=disk --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-osd-0 --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.0:/var/lib/ceph/osd/ceph-0:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.0/config:/etc/ceph/ceph.conf:z -v /dev:/dev -v /run/udev:/run/udev -v /sys:/sys -v /run/lvm:/run/lvm -v /run/lock/lvm:/run/lock/lvm -v /:/rootfs quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -n osd.0 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ ├─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@osd.2.service 
│ │ │ ├─33425 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.2/unit.run
│ │ │ └─33704 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-osd --privileged --group-add=disk --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-osd-2 --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.2:/var/lib/ceph/osd/ceph-2:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/osd.2/config:/etc/ceph/ceph.conf:z -v /dev:/dev -v /run/udev:/run/udev -v /sys:/sys -v /run/lvm:/run/lvm -v /run/lock/lvm:/run/lock/lvm -v /:/rootfs quay.io/ceph/ceph@sha256:1b9158ce28975f95def6a0ad459fa19f1336506074267a4b47c1bd914a00fec0 -n osd.2 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ └─ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4@mon.instance.service 
│ │   ├─12176 /bin/bash /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mon.instance/unit.run
│ │   └─12206 /usr/bin/docker run --rm --ipc=host --stop-signal=SIGTERM --ulimit nofile=1048576 --net=host --entrypoint /usr/bin/ceph-mon --privileged --group-add=disk --init --name ceph-4837cbf8-4f90-4300-b3f6-726c9b9f89b4-mon-instance --pids-limit=0 -e CONTAINER_IMAGE=quay.io/ceph/ceph:v18.2.7 -e NODE_NAME=instance -e TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728 -v /var/run/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/run/ceph:z -v /var/log/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4:/var/log/ceph:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/crash:/var/lib/ceph/crash:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mon.instance:/var/lib/ceph/mon/ceph-instance:z -v /var/lib/ceph/4837cbf8-4f90-4300-b3f6-726c9b9f89b4/mon.instance/config:/etc/ceph/ceph.conf:z -v /dev:/dev -v /run/udev:/run/udev quay.io/ceph/ceph:v18.2.7 -n mon.instance -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug  --default-mon-cluster-log-to-file=false --default-mon-cluster-log-to-stderr=true
│ ├─docker.service …
│ │ └─10224 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
│ ├─polkit.service 
│ │ └─643 /usr/libexec/polkitd --no-debug
│ ├─networkd-dispatcher.service 
│ │ └─617 /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
│ ├─kubelet.service 
│ │ └─39678 /usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf --config=/var/lib/kubelet/config.yaml --cgroups-per-qos=false --container-runtime-endpoint=/run/containerd/containerd.sock --enforce-node-allocatable= --node-ip=199.19.213.139 --pod-infra-container-image=harbor.atmosphere.dev/registry.k8s.io/pause:3.9
│ ├─system-modprobe.slice 
│ ├─cloud-init-local.service 
│ ├─systemd-journald.service 
│ │ └─359 /lib/systemd/systemd-journald
│ ├─ssh.service 
│ │ ├─   644 sshd: /usr/sbin/sshd -D [listener] 1 of 10-100 startups
│ │ ├─105240 sshd: unknown [priv]
│ │ └─105241 sshd: unknown [net]
│ ├─cloud-final.service 
│ ├─uuidd.service 
│ │ └─1387 /usr/sbin/uuidd --socket-activation
│ ├─docker-fe20607cee8887cac988025c471cd645162469c0457bd2c92e7428be9aae416f.scope …
│ │ ├─24534 /sbin/docker-init -- /usr/bin/ceph-osd -n osd.0 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ └─24547 /usr/bin/ceph-osd -n osd.0 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ ├─cloud-config.service 
│ ├─chrony.service 
│ │ ├─10740 /usr/sbin/chronyd -F 1
│ │ └─10741 /usr/sbin/chronyd -F 1
│ ├─docker-f9eb1e9e3125efa707c6e8fea5e5d16dfb97399aaa614fc2dc633e8e82b99ae3.scope …
│ │ ├─12648 /sbin/docker-init -- /usr/bin/ceph-mgr -n mgr.instance.byaoym -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ └─12668 /usr/bin/ceph-mgr -n mgr.instance.byaoym -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ ├─docker.socket 
│ ├─docker-2a3c951184870c0fa88ba87efae474ac9f9fb9aa602a12a75ed429b2e53b2bbf.scope …
│ │ ├─33744 /sbin/docker-init -- /usr/bin/ceph-osd -n osd.2 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ │ └─33756 /usr/bin/ceph-osd -n osd.2 -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug
│ ├─systemd-resolved.service 
│ │ └─395 /lib/systemd/systemd-resolved
│ ├─system-lvm2\x2dpvscan.slice 
│ ├─docker-1cfb53e45e80dcd210126e482b33e7b0cdc5420257b1eaf3198d714b752544be.scope …
│ │ ├─12286 /sbin/docker-init -- /usr/bin/ceph-mon -n mon.instance -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug  --default-mon-cluster-log-to-file=false --default-mon-cluster-log-to-stderr=true
│ │ └─12298 /usr/bin/ceph-mon -n mon.instance -f --setuser ceph --setgroup ceph --default-log-to-file=false --default-log-to-stderr=true --default-log-stderr-prefix=debug  --default-mon-cluster-log-to-file=false --default-mon-cluster-log-to-stderr=true
│ ├─dbus.service 
│ │ └─614 @dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
│ ├─system-getty.slice 
│ │ └─getty@tty1.service 
│ │   └─629 /sbin/agetty -o -p -- \u --noclear tty1 linux
│ └─systemd-logind.service 
│   └─620 /lib/systemd/systemd-logind
├─k8s.io 
│ ├─c9f646079b7399b1ba23fccb630e0a660a77d79bc89fdc6e223026dd73a47784 
│ │ ├─96321 glance-api: uWSGI master
│ │ ├─96335 glance-api: uWSGI worker 1
│ │ └─96336 glance-api: uWSGI worker 2
│ ├─f6e0c285f99bc0c6b83aec8cfd7f5f7f271bfe9226c6bd9fadefbc14d0f23ef3 
│ │ └─56615 /pause
│ ├─cf2c3ac1c9efbfa4dd786669f3832543f4701d40ad9920f9fa37af37b33e788f 
│ │ └─53872 nfd-master -crd-controller=true -metrics=8081
│ ├─8f76d9a115724cbce50dedc6f262fa22b76c6800d7020b2e5e25d385bd95a4dd 
│ │ └─70345 /pause
│ ├─29745c8def27086d83c00a4ae926e8e3edd3b2334de9c61fca750ac27da2e41c 
│ │ └─85903 /usr/libexec/platform-python -s /usr/bin/ceph-crash
│ ├─b0deaf4571f27e1103d05153278551830f48ebabf81610a3be258b0849d2e224 
│ │ └─53906 nfd-gc -gc-interval=1h
│ ├─c1bb5f7f19d3b1cf8ccb130f5c2871bd245645bf36886c2ef744992a90eaa549 
│ │ └─59876 memcached -m 8192 --extended=modern,track_sizes -I 5m -c 16384 -v -u 11211
│ ├─b0f2914adaf7b6743cbd6d132211d866b796f469e12d166a30422e08ffdc2f84 
│ │ └─42993 local-path-provisioner --debug start --config /etc/config/config.json --service-account-name local-path-provisioner --provisioner-name cluster.local/local-path-provisioner --helper-image harbor.atmosphere.dev/ghcr.io/containerd/busybox:1.36 --configmap-name local-path-config
│ ├─7f8671060cb6f2469b7b09707ddabc59514c1fce84ba5a57146248eddfb33a18 
│ │ └─59474 /pause
│ ├─03dad4649d16d66137cfbf96680abe6e70f19d03723f160ebca81e3d820b7db5 
│ │ └─42402 /coredns -conf /etc/coredns/Corefile
│ ├─f1cf33a541a5dd9989993498e512cc5dcfdbe032cf63b58994118c7658af81ee 
│ │ └─53592 /pause
│ ├─1143b3fd9c52ca6b0380c7b61649dc96aec0568f5f6094058c1757ea899335a3 
│ │ └─39491 etcd --advertise-client-urls=https://199.19.213.139:2379 --cert-file=/etc/kubernetes/pki/etcd/server.crt --client-cert-auth=true --data-dir=/var/lib/etcd --experimental-initial-corrupt-check=true --experimental-watch-progress-notify-interval=5s --initial-advertise-peer-urls=https://199.19.213.139:2380 --initial-cluster=instance=https://199.19.213.139:2380 --key-file=/etc/kubernetes/pki/etcd/server.key --listen-client-urls=https://127.0.0.1:2379,https://199.19.213.139:2379 --listen-metrics-urls=http://127.0.0.1:2381 --listen-peer-urls=https://199.19.213.139:2380 --name=instance --peer-cert-file=/etc/kubernetes/pki/etcd/peer.crt --peer-client-cert-auth=true --peer-key-file=/etc/kubernetes/pki/etcd/peer.key --peer-trusted-ca-file=/etc/kubernetes/pki/etcd/ca.crt --snapshot-count=10000 --tls-min-version=TLS1.3 --trusted-ca-file=/etc/kubernetes/pki/etcd/ca.crt
│ ├─8f941a40d4fe0a356fee598434259df02d8ccf86aba08a765b6225c0ef32b883 
│ │ └─57731 /usr/bin/pod-tls-sidecar --template=/config/certificate-template.yml --ca-path=/certs/ca.crt --cert-path=/certs/tls.crt --key-path=/certs/tls.key
│ ├─06c2420e6845c87f6a16d5124a122104f16e1b554143757a2c50cb9ce57f75d3 
│ │ └─74547 /pause
│ ├─91d9c1a519a65986e12ad0567a4844ddda9b0ab176d4ec4358e23433f9603e94 
│ │ └─60259 /pause
│ ├─f52062546990d9b9bcf91e731ccc9d9d7a6763f9288aac13ab365e7204a61901 
│ │ └─39230 /pause
│ ├─3147fb1bb45d37a37093cc5b9aeaa26bedcb00cd322c8909613c8b681363cd35 
│ │ ├─ 85056 radosgw --fsid=4837cbf8-4f90-4300-b3f6-726c9b9f89b4 --keyring=/etc/ceph/keyring-store/keyring --default-log-to-stderr=true --default-err-to-stderr=true --default-mon-cluster-log-to-stderr=true --default-log-stderr-prefix=debug  --default-log-to-file=false --default-mon-cluster-log-to-file=false --mon-host=[v2:10.96.240.200:3300,v1:10.96.240.200:6789] --mon-initial-members=instance --id=rgw.ceph.a --setuser=ceph --setgroup=ceph --foreground --rgw-frontends=beast port=8080 --host=rook-ceph-rgw-ceph-a-cf9f85b9f-kh6tj --rgw-mime-types-file=/etc/ceph/rgw/mime.types --rgw-realm=ceph --rgw-zonegroup=ceph --rgw-zone=ceph
│ │ ├─105304 bash -c #!/usr/bin/env bash

PROBE_TYPE="readiness"
PROBE_PORT="8080"
PROBE_PROTOCOL="HTTP"

# standard bash codes start at 126 and progress upward. pick error codes from 125 downward for
# script as to allow curl to output new error codes and still return a distinctive number.
USAGE_ERR_CODE=125
PROBE_ERR_CODE=124
# curl error codes: 1-123

STARTUP_TYPE='startup'
READINESS_TYPE='readiness'

RGW_URL="$PROBE_PROTOCOL://0.0.0.0:$PROBE_PORT"

function check() {
  local URL="$1"
  # --insecure - don't validate ssl if using secure port only
  # --silent - don't output progress info
  # --output /dev/stderr - output HTML header to stdout (good for debugging)
  # --write-out '%{response_code}' - print the HTTP response code to stdout
  curl --insecure --silent --output /dev/stderr --write-out '%{response_code}' "$URL"
}

http_response="$(check "$RGW_URL")"
retcode=$?

if [[ $retcode -ne 0 ]]; then
  # if this is the startup probe, always returning failure. if startup probe passes, all subsequent
  # probes can rely on the assumption that the health check was once succeeding without errors.
  # if this is the readiness probe, we know that curl was previously working correctly in the
  # startup probe, so curl error most likely means some new error with the RGW.
  echo "RGW health check failed with error code: $retcode. the RGW likely cannot be reached by clients" >/dev/stderr
  exit $retcode
fi

RGW_RATE_LIMITING_RESPONSE=503
RGW_MISCONFIGURATION_RESPONSE=500

if [[ $http_response -ge 200 ]] && [[ $http_response -lt 400 ]]; then
  # 200-399 are successful responses. same behavior as Kubernetes' HTTP probe
  exit 0

elif [[ $http_response -eq $RGW_RATE_LIMITING_RESPONSE ]]; then
  # S3's '503: slow down' code is not an error but an indication that RGW is throttling client
  # traffic. failing the readiness check here would only cause an increase in client connections on
  # other RGWs and likely cause those to fail also in a cascade. i.e., a special healthy response.
  echo "INFO: RGW is rate limiting" 2>/dev/stderr
  exit 0

elif [[ $http_response -eq $RGW_MISCONFIGURATION_RESPONSE ]]; then
  # can't specifically determine if the RGW is running or not. most likely a misconfiguration.
  case "$PROBE_TYPE" in
  "$STARTUP_TYPE")
    # fail until we can accurately get a valid healthy response when runtime starts.
    echo 'FAIL: HTTP code 500 suggests an RGW misconfiguration.' >/dev/stderr
    exit $PROBE_ERR_CODE
    ;;
  "$READINESS_TYPE")
    # config likely modified at runtime which could result in all RGWs failing this check.
    # occasional client failures are still better than total failure, so ignore this
    echo 'WARN: HTTP code 500 suggests an RGW misconfiguration' >/dev/stderr
    exit 0
    ;;
  *)
    # prior arg validation means this path should never be activated, but keep to be safe
    echo "ERROR: probe type is unknown: $PROBE_TYPE" >/dev/stderr
    exit $USAGE_ERR_CODE
    ;;
  esac

else
  # anything else is a failing response. same behavior as Kubernetes' HTTP probe
  echo "FAIL: received an HTTP error code: $http_response"
  exit $PROBE_ERR_CODE

fi
│ │ ├─105311 bash -c #!/usr/bin/env bash

PROBE_TYPE="readiness"
PROBE_PORT="8080"
PROBE_PROTOCOL="HTTP"

# standard bash codes start at 126 and progress upward. pick error codes from 125 downward for
# script as to allow curl to output new error codes and still return a distinctive number.
USAGE_ERR_CODE=125
PROBE_ERR_CODE=124
# curl error codes: 1-123

STARTUP_TYPE='startup'
READINESS_TYPE='readiness'

RGW_URL="$PROBE_PROTOCOL://0.0.0.0:$PROBE_PORT"

function check() {
  local URL="$1"
  # --insecure - don't validate ssl if using secure port only
  # --silent - don't output progress info
  # --output /dev/stderr - output HTML header to stdout (good for debugging)
  # --write-out '%{response_code}' - print the HTTP response code to stdout
  curl --insecure --silent --output /dev/stderr --write-out '%{response_code}' "$URL"
}

http_response="$(check "$RGW_URL")"
retcode=$?

if [[ $retcode -ne 0 ]]; then
  # if this is the startup probe, always returning failure. if startup probe passes, all subsequent
  # probes can rely on the assumption that the health check was once succeeding without errors.
  # if this is the readiness probe, we know that curl was previously working correctly in the
  # startup probe, so curl error most likely means some new error with the RGW.
  echo "RGW health check failed with error code: $retcode. the RGW likely cannot be reached by clients" >/dev/stderr
  exit $retcode
fi

RGW_RATE_LIMITING_RESPONSE=503
RGW_MISCONFIGURATION_RESPONSE=500

if [[ $http_response -ge 200 ]] && [[ $http_response -lt 400 ]]; then
  # 200-399 are successful responses. same behavior as Kubernetes' HTTP probe
  exit 0

elif [[ $http_response -eq $RGW_RATE_LIMITING_RESPONSE ]]; then
  # S3's '503: slow down' code is not an error but an indication that RGW is throttling client
  # traffic. failing the readiness check here would only cause an increase in client connections on
  # other RGWs and likely cause those to fail also in a cascade. i.e., a special healthy response.
  echo "INFO: RGW is rate limiting" 2>/dev/stderr
  exit 0

elif [[ $http_response -eq $RGW_MISCONFIGURATION_RESPONSE ]]; then
  # can't specifically determine if the RGW is running or not. most likely a misconfiguration.
  case "$PROBE_TYPE" in
  "$STARTUP_TYPE")
    # fail until we can accurately get a valid healthy response when runtime starts.
    echo 'FAIL: HTTP code 500 suggests an RGW misconfiguration.' >/dev/stderr
    exit $PROBE_ERR_CODE
    ;;
  "$READINESS_TYPE")
    # config likely modified at runtime which could result in all RGWs failing this check.
    # occasional client failures are still better than total failure, so ignore this
    echo 'WARN: HTTP code 500 suggests an RGW misconfiguration' >/dev/stderr
    exit 0
    ;;
  *)
    # prior arg validation means this path should never be activated, but keep to be safe
    echo "ERROR: probe type is unknown: $PROBE_TYPE" >/dev/stderr
    exit $USAGE_ERR_CODE
    ;;
  esac

else
  # anything else is a failing response. same behavior as Kubernetes' HTTP probe
  echo "FAIL: received an HTTP error code: $http_response"
  exit $PROBE_ERR_CODE

fi
│ │ └─105312 curl --insecure --silent --output /dev/stderr --write-out %{response_code} HTTP://0.0.0.0:8080
│ ├─647ff076a87353e5993dddd112454e69b7cd3e28a21fce6cf4d03cc803b2279d 
│ │ ├─65436 apache2 -DFOREGROUND
│ │ ├─65451 (wsgi:k -DFOREGROUND
│ │ ├─65452 (wsgi:k -DFOREGROUND
│ │ ├─65453 (wsgi:k -DFOREGROUND
│ │ ├─65454 (wsgi:k -DFOREGROUND
│ │ ├─65455 apache2 -DFOREGROUND
│ │ ├─65456 apache2 -DFOREGROUND
│ │ ├─65459 apache2 -DFOREGROUND
│ │ ├─65461 apache2 -DFOREGROUND
│ │ ├─65462 apache2 -DFOREGROUND
│ │ ├─65463 apache2 -DFOREGROUND
│ │ ├─65466 apache2 -DFOREGROUND
│ │ ├─65467 apache2 -DFOREGROUND
│ │ ├─65468 apache2 -DFOREGROUND
│ │ └─65470 apache2 -DFOREGROUND
│ ├─7750bd72f37442934b32d7d30d5f089d5e7c354cc264e0d82f5957ceab3194b3 
│ │ ├─41091 cilium-agent --config-dir=/tmp/cilium/config-map
│ │ └─41509 cilium-health-responder --listen 4240 --pidfile /var/run/cilium/state/health-endpoint.pid
│ ├─72385d0efddfbe571c7811bbdb2b7216b03ff950aaa50ffa1d251fdab2afa387 
│ │ └─39860 /pause
│ ├─c83d9f6157d1aa2ecca597ca9b20214acd4887b5b885fdbdb916473ad2a8b460 
│ │ └─39371 /pause
│ ├─7a02c72326bc1d0d8ce24974ec227257b79f078b4e6ce29b2351940891973764 
│ │ └─39331 /pause
│ ├─ccb52d6199cdd913db1e9a715511f20d99e96b84c41e5da351aaa5baa552e1ae 
│ │ └─53552 /pause
│ ├─90a963b6406ad97e545e291b8b14243bf569889155a10eb0a9838152062f4cbe 
│ │ ├─57373 python -u /app/sidecar.py
│ │ ├─57594 python -u /app/sidecar.py
│ │ └─57595 python -u /app/sidecar.py
│ ├─3ce506b966714551368b25888c5205bd36f5415a1ea96224f6e9dec08b8fb9df 
│ │ └─61027 /bin/prometheus --web.console.templates=/etc/prometheus/consoles --web.console.libraries=/etc/prometheus/console_libraries --config.file=/etc/prometheus/config_out/prometheus.env.yaml --web.enable-lifecycle --web.external-url=http://prometheus.199-19-213-139.nip.io/ --web.route-prefix=/ --storage.tsdb.retention.time=10d --storage.tsdb.path=/prometheus --storage.tsdb.wal-compression --web.config.file=/etc/prometheus/web_config/web-config.yaml
│ ├─21011d906d1e776b70fcf098519f9e20ceb27eec42ffaa02578c74f14a324106 
│ │ └─45751 /server
│ ├─efff5eee943d4ca136642b0458633ad6039333e5fed77656cd504fd0d0d2dc8c 
│ │ └─40854 cilium-operator-generic --config-dir=/tmp/cilium/config-map --debug=false
│ ├─9d7cce63e31edb67f7a8b437273355e539c08ecb2dd0f0f30c0abfc87be1c061 
│ │ └─61265 /bin/pushgateway
│ ├─e4aeded656ef1914e2bb003d41856e181c5b516b98cdf12cf530d46f86d26b6b 
│ │ └─60702 /goldpinger --static-file-path /static
│ ├─a3e650c0cc795aaae413b91569350872428449efd38102ec7929add55658e056 
│ │ └─39377 /pause
│ ├─86249513b843543f8fb7e2d3fe0a15d31382be47aa497565cd96c0d2ae143605 
│ │ └─53794 /pause
│ ├─1c0f148db4554eca64caf854d6cb615fe6328c3dc04691a7ece5e6cd34433151 
│ │ └─97117 /pause
│ ├─cb21bfef33db7ee2daad2e949ec4a0b84ad496aecffb62a9dc6071a688446915 
│ │ └─59622 /pause
│ ├─72c7b72cb229e6126b519d74e77445716c3413bf6e023b26e7105960d2258991 
│ │ └─47573 /pause
│ ├─3afc05d76f68929cd6a0bbd867c618d9706c635e3f9079fcdaddbb807cefbc50 
│ │ └─39467 kube-apiserver --advertise-address=199.19.213.139 --allow-privileged=true --authorization-mode=Node,RBAC --client-ca-file=/etc/kubernetes/pki/ca.crt --enable-admission-plugins=NodeRestriction --enable-bootstrap-token-auth=true --etcd-cafile=/etc/kubernetes/pki/etcd/ca.crt --etcd-certfile=/etc/kubernetes/pki/apiserver-etcd-client.crt --etcd-keyfile=/etc/kubernetes/pki/apiserver-etcd-client.key --etcd-servers=https://127.0.0.1:2379 --kubelet-client-certificate=/etc/kubernetes/pki/apiserver-kubelet-client.crt --kubelet-client-key=/etc/kubernetes/pki/apiserver-kubelet-client.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.crt --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client.key --requestheader-allowed-names=front-proxy-client --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6443 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/etc/kubernetes/pki/sa.pub --service-account-signing-key-file=/etc/kubernetes/pki/sa.key --service-cluster-ip-range=10.96.0.0/12 --tls-cert-file=/etc/kubernetes/pki/apiserver.crt --tls-min-version=VersionTLS13 --tls-private-key-file=/etc/kubernetes/pki/apiserver.key
│ ├─6217cf7aaca81c9cc36ab8b6738d6d844cfbe164481037355e21ec821b169d79 
│ │ └─46261 /pause
│ ├─cc08bfc163e77915c5ccd5c270acb19c45c7c1d0f02b4720090b25af441a000f 
│ │ └─56435 /pause
│ ├─52053cb37268b53d1db8635971c514d422f963b051a68eadcf57378de87d4297 
│ │ └─39505 kube-scheduler --authentication-kubeconfig=/etc/kubernetes/scheduler.conf --authorization-kubeconfig=/etc/kubernetes/scheduler.conf --bind-address=0.0.0.0 --kubeconfig=/etc/kubernetes/scheduler.conf --leader-elect=true --tls-min-version=VersionTLS13
│ ├─e16505e58c4a1ef1576cec504aaef386a8b014445fbfe748ce8c4e1b0f07f73f 
│ │ └─57507 /kube-state-metrics --port=8080 --telemetry-port=8081 --port=8080 --resources=certificatesigningrequests,configmaps,cronjobs,daemonsets,deployments,endpoints,horizontalpodautoscalers,ingresses,jobs,leases,limitranges,mutatingwebhookconfigurations,namespaces,networkpolicies,nodes,persistentvolumeclaims,persistentvolumes,poddisruptionbudgets,pods,replicasets,replicationcontrollers,resourcequotas,secrets,services,statefulsets,storageclasses,validatingwebhookconfigurations,volumeattachments
│ ├─c852f5c870ee5bc52b4e02c1d87f121e98c763688a2bfa87b6ca4f2bd07496b4 
│ │ └─84589 /pause
│ ├─472d09ce99b11554934c8a35e62f96c5e6db89b8d2cae053d3ec1eb5799b5604 
│ │ └─42816 /pause
│ ├─20bb3a43258cc9071d895ac5dd4c2a9b19ba5fa4761a3a66d43d667d889e355e 
│ │ └─43557 /app/cmd/webhook/webhook --v=2 --secure-port=10250 --feature-gates=AdditionalCertificateOutputFormats=true --dynamic-serving-ca-secret-namespace=cert-manager --dynamic-serving-ca-secret-name=cert-manager-webhook-ca --dynamic-serving-dns-names=cert-manager-webhook --dynamic-serving-dns-names=cert-manager-webhook.cert-manager --dynamic-serving-dns-names=cert-manager-webhook.cert-manager.svc --feature-gates=AdditionalCertificateOutputFormats=true
│ ├─ded95ff0637db7ffd89adcb9f74b30d6117ce354d44e0432009b098d27a36c58 
│ │ ├─79501 /bin/sh /opt/rabbitmq/sbin/rabbitmq-server
│ │ ├─79517 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/beam.smp -W w -MBas ageffcbf -MHas ageffcbf -MBlmbcs 512 -MHlmbcs 512 -MMmcs 30 -P 1048576 -t 5000000 -stbt db -zdbbl 128000 -sbwt none -sbwtdcpu none -sbwtdio none -B i -- -root /opt/erlang/lib/erlang -bindir /opt/erlang/lib/erlang/erts-13.2.2.6/bin -progname erl -- -home /var/lib/rabbitmq -- -pa  -noshell -noinput -s rabbit boot -boot start_sasl -syslog logger [] -syslog syslog_error_logger false -kernel prevent_overlapping_partitions false
│ │ ├─79523 erl_child_setup 1048576
│ │ ├─79602 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/epmd -daemon
│ │ ├─79655 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ ├─79656 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ └─79963 /bin/sh -s rabbit_disk_monitor
│ ├─cac04ed313fc3652f6b0733bb93d556bad672bc54752e8e0b2c12dd1a2aa6230 
│ │ └─39618 /kube-vip manager
│ ├─fc4b62fbba66a03b9bdf457483f219429922a99ccceacb6353cb92783bd25a53 
│ │ └─39363 /pause
│ ├─22bd0477b5c65b994bb1c4bdf97578c4a524c1f215e7a86e2d9a1ba0b4b79d27 
│ │ └─58311 /pause
│ ├─c9dcda6f5f0663c1517b981d06c0653516627b9b660fa69d707478fa573848c5 
│ │ └─61535 /bin/oauth2-proxy
│ ├─4664855e2284d11fbdb1c3924d998d50933034311267af0b7ae1c6a52f9af66a 
│ │ └─43392 /pause
│ ├─b7c7f08fae5dfce794fd40bd012a5014924a116e6de6ddf11498053708ab6914 
│ │ └─61439 /bin/memcached_exporter --memcached.address=localhost:11211 --web.listen-address=0.0.0.0:9150
│ ├─2fca2e999841ab7afc422be34a4aa14fe62befead99dce43b38271427c194948 
│ │ ├─61821 /bin/sh /opt/rabbitmq/sbin/rabbitmq-server
│ │ ├─61838 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/beam.smp -W w -MBas ageffcbf -MHas ageffcbf -MBlmbcs 512 -MHlmbcs 512 -MMmcs 30 -P 1048576 -t 5000000 -stbt db -zdbbl 128000 -sbwt none -sbwtdcpu none -sbwtdio none -B i -- -root /opt/erlang/lib/erlang -bindir /opt/erlang/lib/erlang/erts-13.2.2.6/bin -progname erl -- -home /var/lib/rabbitmq -- -pa  -noshell -noinput -s rabbit boot -boot start_sasl -syslog logger [] -syslog syslog_error_logger false -kernel prevent_overlapping_partitions false
│ │ ├─61844 erl_child_setup 1048576
│ │ ├─61911 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/epmd -daemon
│ │ ├─61962 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ ├─61963 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ └─62157 /bin/sh -s rabbit_disk_monitor
│ ├─9e60fcf6e935d2b8dbbed7635dc36d68115708a5771fb362f3486213fa14c5f3 
│ │ └─61113 /usr/bin/pod-tls-sidecar --template=/config/certificate-template.yml --ca-path=/certs/ca.crt --cert-path=/certs/tls.crt --key-path=/certs/tls.key
│ ├─8fc6e1b0afe11c4a010562497eb3b624ff3e4dcfd23c561538d589c718451151 
│ │ └─97730 /pause
│ ├─6a82b02a4849e6d3a56eb5b59fa1ed1c0d1f19d2cbc7832c2d8a2b98de9e50be 
│ │ └─39447 kube-controller-manager --authentication-kubeconfig=/etc/kubernetes/controller-manager.conf --authorization-kubeconfig=/etc/kubernetes/controller-manager.conf --bind-address=0.0.0.0 --client-ca-file=/etc/kubernetes/pki/ca.crt --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/pki/ca.crt --cluster-signing-key-file=/etc/kubernetes/pki/ca.key --controllers=*,bootstrapsigner,tokencleaner --kubeconfig=/etc/kubernetes/controller-manager.conf --leader-elect=true --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt --root-ca-file=/etc/kubernetes/pki/ca.crt --service-account-private-key-file=/etc/kubernetes/pki/sa.key --tls-min-version=VersionTLS13 --use-service-account-credentials=true
│ ├─8ce74771b31803228690d82f8b1d5a4c4456e06f8d4114df99d91922b6e9fe94 
│ │ └─56870 /bin/operator --kubelet-service=kube-system/kube-prometheus-stack-kubelet --localhost=127.0.0.1 --prometheus-config-reloader=harbor.atmosphere.dev/quay.io/prometheus-operator/prometheus-config-reloader:v0.73.0 --config-reloader-cpu-request=0 --config-reloader-cpu-limit=0 --config-reloader-memory-request=0 --config-reloader-memory-limit=0 --thanos-default-base-image=quay.io/thanos/thanos:v0.34.1 --secret-field-selector=type!=kubernetes.io/dockercfg,type!=kubernetes.io/service-account-token,type!=helm.sh/release.v1 --web.enable-tls=true --web.cert-file=/cert/cert --web.key-file=/cert/key --web.listen-address=:10250 --web.tls-min-version=VersionTLS13
│ ├─78cd748278f02049917a943c01816d1a21cd37aced2c56f7aa5b4df44845b496 
│ │ └─46492 /manager --metrics-bind-address=:8080
│ ├─b6d52baa7ee89b97ef6db355b1bbc481baf6e111bce595469a9e8b9792aadfcf 
│ │ └─43307 /pause
│ ├─41928fc35697634811a032081fddfacf8d030b3e9f2dac99c3c65c82e2308220 
│ │ └─97191 kubernetes-entrypoint
│ ├─f895c328ea860a582a6d9ad8e0fb33041e84d0bc21a5241cbe60acd8e33bfc37 
│ │ └─61070 /bin/prometheus-config-reloader --listen-address=:8080 --reload-url=http://127.0.0.1:9090/-/reload --config-file=/etc/prometheus/config/prometheus.yaml.gz --config-envsubst-file=/etc/prometheus/config_out/prometheus.env.yaml --watched-dir=/etc/prometheus/rules/prometheus-kube-prometheus-stack-prometheus-rulefiles-0
│ ├─446462eec8e3086809eff69f7ee5a2f40772f4194fa8d4a44278aef88fa95d65 
│ │ └─58349 /pause
│ ├─d44fd2e8d3d7b4ac7fa988920f710e4addd079215124f208241add5f960dc9c8 
│ │ └─75127 /usr/local/bin/rook ceph operator
│ ├─dd3a308a9a8d736546b4fddfed02d83843434ee3f2d29014fe8b8fb9c694e809 
│ │ └─60366 memcached -v -p 11211 -U 0 -c 8192 -m 1024
│ ├─dffdde096090fc72b9db4104aa2fd0ae9d84ce6f71e9e2a3fd6a571bed5248dc 
│ │ └─43603 /app/cmd/cainjector/cainjector --v=2 --leader-election-namespace=cert-manager
│ ├─ee1295e7979de886a48e06bd81cd8d24c87581f768f8bc4ada485267e7f535ca 
│ │ └─43355 /pause
│ ├─6cd69ca8a83096d2082984693ab11166c7e7ab5191d22988bc23d45f54cdd4d8 
│ │ └─97165 /pause
│ ├─d6618b804a630b7cde6ab66a8f2f52f77ff176dd24df9455c6f23d4f0832ce2e 
│ │ └─42427 /coredns -conf /etc/coredns/Corefile
│ ├─dfd66d845926a8d5edc6d081a00c08614e4c7947bf8e68776cd56bca1ae21acf 
│ │ └─47176 /pause
│ ├─d67581a5abc99a87020c096031797887882fe409d9e212aa59e57b4692db8960 
│ │ └─46370 /manager --metrics-bind-address=:9782
│ ├─02f1ebe489511bde946cccfb855d4247498fd31392a7f9a54a92c3f31f159cb3 
│ │ └─96009 /pause
│ ├─9a5924e594e7af1ad4426d9ecfc239323fde6c2d8ab5fc3cd37cbb28748e566f 
│ │ └─84636 /pause
│ ├─e4f0efaf531cb2fe6559f0d4b1277c6233af35b35f4a7c35379f2989cc383b53 
│ │ ├─59280 nginx: master process nginx -g daemon off;
│ │ ├─59295 nginx: worker process
│ │ ├─59296 nginx: worker process
│ │ ├─59297 nginx: worker process
│ │ ├─59298 nginx: worker process
│ │ └─59299 nginx: worker process
│ ├─dc82300ea638e307a88819fb596e60c4e498364a92d2289a9f2e02b341dc04c1 
│ │ └─52944 /pause
│ ├─900c2529a5268ae2b6d600f204a0d6696afc5d7142f80e3a99a49d7a1af12ea2 
│ │ └─61387 /pause
│ ├─b9671f2746305f51f8c4f0e8d8a3ea59996b4f3183a829c145686ebdb1a4ac09 
│ │ ├─85157 /bin/bash -x -e -m -c 
CEPH_CLIENT_ID=ceph-client.rgw.ceph.a
PERIODICITY=daily
LOG_ROTATE_CEPH_FILE=/etc/logrotate.d/ceph
LOG_MAX_SIZE=500M
ROTATE=7

# edit the logrotate file to only rotate a specific daemon log
# otherwise we will logrotate log files without reloading certain daemons
# this might happen when multiple daemons run on the same machine
sed -i "s|*.log|$CEPH_CLIENT_ID.log|" "$LOG_ROTATE_CEPH_FILE"

# replace default daily with given user input
sed --in-place "s/daily/$PERIODICITY/g" "$LOG_ROTATE_CEPH_FILE"

# replace rotate count, default 7 for all ceph daemons other than rbd-mirror
sed --in-place "s/rotate 7/rotate $ROTATE/g" "$LOG_ROTATE_CEPH_FILE"

if [ "$LOG_MAX_SIZE" != "0" ]; then
	# adding maxsize $LOG_MAX_SIZE at the 4th line of the logrotate config file with 4 spaces to maintain indentation
	sed --in-place "4i \ \ \ \ maxsize $LOG_MAX_SIZE" "$LOG_ROTATE_CEPH_FILE"
fi

while true; do
	# we don't force the logrorate but we let the logrotate binary handle the rotation based on user's input for periodicity and size
	logrotate --verbose "$LOG_ROTATE_CEPH_FILE"
	sleep 15m
done
│ │ └─85202 /usr/bin/coreutils --coreutils-prog-shebang=sleep /usr/bin/sleep 15m
│ ├─ece7f76be8429629f4329f9fb7d2a19406f82c14346cb2bc2553a06b2c0c514f 
│ │ └─56575 /pause
│ ├─3c09b2de25ac50947561ab4992614b3946f4abec2fa4926f859712f71299d02a 
│ │ └─47008 percona-xtradb-cluster-operator
│ ├─a58f36ee8eed5996dea81b3f2586a5cda360d3bfba6a532fda0c92f4d2de1b2b 
│ │ ├─60403 /usr/bin/vector --config-dir /etc/vector/
│ │ └─60438 journalctl --follow --all --show-cursor --output=json --boot --since=2000-01-01
│ ├─586c0121155104b88fe2eaadfce2e48ff0f25b04fde0143e918e59389a6d1324 
│ │ └─61209 /usr/bin/loki -config.file=/etc/loki/config/config.yaml -target=all
│ ├─ae8fa3542ccf8841274edc8e1379bbb80f07cf54ed06eac3745b9cbcbcf94d39 
│ │ ├─69570 /bin/sh /opt/rabbitmq/sbin/rabbitmq-server
│ │ ├─69587 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/beam.smp -W w -MBas ageffcbf -MHas ageffcbf -MBlmbcs 512 -MHlmbcs 512 -MMmcs 30 -P 1048576 -t 5000000 -stbt db -zdbbl 128000 -sbwt none -sbwtdcpu none -sbwtdio none -B i -- -root /opt/erlang/lib/erlang -bindir /opt/erlang/lib/erlang/erts-13.2.2.6/bin -progname erl -- -home /var/lib/rabbitmq -- -pa  -noshell -noinput -s rabbit boot -boot start_sasl -syslog logger [] -syslog syslog_error_logger false -kernel prevent_overlapping_partitions false
│ │ ├─69593 erl_child_setup 1048576
│ │ ├─69712 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/epmd -daemon
│ │ ├─69774 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ ├─69775 /opt/erlang/lib/erlang/erts-13.2.2.6/bin/inet_gethost 4
│ │ └─69813 /bin/sh -s rabbit_disk_monitor
│ ├─f43c8826072e827efedfdd227b0eaf70df06ac9dde9e16dae1566b42fffba983 
│ │ └─40595 /pause
│ ├─b0473065df58dc4e98cc8b66c7ece3cd0db97b0aed3de8ddbf28e93f21757a50 
│ │ ├─57346 python -u /app/sidecar.py
│ │ ├─57592 python -u /app/sidecar.py
│ │ └─57593 python -u /app/sidecar.py
│ ├─29f7a1dbce9864158e005e40fa6f8fb8f3ccc0281b946f0b7d2f8666a2143d09 
│ │ └─61471 /bin/memcached_exporter
│ ├─4c1474c93cfca83c01e47623c89fc31c864c0a767682cb27fe5ea88cd7e990ce 
│ │ └─61411 /bin/memcached_exporter --memcached.address=localhost:11211 --web.listen-address=0.0.0.0:9150
│ ├─055dbe730f95ed58e2aa50418388541cd87145e3dfcc8d98d805de285713995c 
│ │ └─45476 /pause
│ ├─965cd09cf4bb905d9c54b6c09d84c92c1f875b8b8f55350fef32c0247cd3227c 
│ │ └─47685 /opt/percona/peer-list -on-change=/opt/percona/haproxy_add_pxc_nodes.sh -service=percona-xtradb-pxc
│ ├─76c4dd723916088446081af8e509d918d42accab6345f0ac3c03a1b69a31cb6a 
│ │ └─42372 /pause
│ ├─20c8249a1fdcdc5540a78b15ed3bfeea23bde39a1f6b16fc5c3dc128991c7ca6 
│ │ └─61554 /bin/oauth2-proxy
│ ├─f9f638315a73e4515d5e4ca99fa52b51048a7b4860a316dcb3526609ff1aa2cf 
│ │ └─53832 nfd-worker -metrics=8081
│ ├─ee7da190a3be0b39e25834b909c367505171b95941aeedfb96b0048a14a8f43f 
│ │ └─56530 /pause
│ ├─c5672abfa2bb1f8ab1a1ccb67e59f19a30c109840eb08f65c3ebfe56f74db5aa 
│ │ └─53104 /kubernetes-entrypoint
│ ├─55027d676e775c461a5bc89488e34d71b8cff94fa7a1632b9a701d51cee5e3dc 
│ │ └─41946 /pause
│ ├─8a42a81987005df435694a2194654793722ec90b8468165cb814a963741dd1c7 
│ │ └─46302 /pause
│ ├─a97c3a937f69d0d04e42e34d3451cfd3bca67aa8762fbbb853ace8dc72439f0a 
│ │ └─59140 /pause
│ ├─fd3f87dd3a25cf91d1bc886d9d91ede401693ce917633c38e3363bfa67bd5bca 
│ │ ├─45714 /usr/bin/dumb-init -- /nginx-ingress-controller --default-backend-service=ingress-nginx/ingress-nginx-defaultbackend --publish-service=ingress-nginx/ingress-nginx-controller --election-id=ingress-nginx-leader --controller-class=k8s.io/ingress-nginx --ingress-class=atmosphere --configmap=ingress-nginx/ingress-nginx-controller --tcp-services-configmap=ingress-nginx/ingress-nginx-tcp --udp-services-configmap=ingress-nginx/ingress-nginx-udp --validating-webhook=:7443 --validating-webhook-certificate=/usr/local/certificates/cert --validating-webhook-key=/usr/local/certificates/key --enable-metrics=true
│ │ ├─45726 /nginx-ingress-controller --default-backend-service=ingress-nginx/ingress-nginx-defaultbackend --publish-service=ingress-nginx/ingress-nginx-controller --election-id=ingress-nginx-leader --controller-class=k8s.io/ingress-nginx --ingress-class=atmosphere --configmap=ingress-nginx/ingress-nginx-controller --tcp-services-configmap=ingress-nginx/ingress-nginx-tcp --udp-services-configmap=ingress-nginx/ingress-nginx-udp --validating-webhook=:7443 --validating-webhook-certificate=/usr/local/certificates/cert --validating-webhook-key=/usr/local/certificates/key --enable-metrics=true
│ │ ├─45833 nginx: master process /usr/bin/nginx -c /etc/nginx/nginx.conf
│ │ ├─92485 nginx: worker process
│ │ ├─92487 nginx: worker process
│ │ └─92488 nginx: cache manager process
│ ├─615164911db7c9f63eb7680024cd7a825eb23cbed9b7e2706685fa273496be2b 
│ │ └─58257 /pause
│ ├─fcb040e06a8613225c5d5e76cbfc7c5d7045734b09d0bb0c72b98960160ee572 
│ │ ├─47601 haproxy -W -db -f /etc/haproxy-custom/haproxy-global.cfg -f /etc/haproxy/pxc/haproxy.cfg -p /etc/haproxy/pxc/haproxy.pid -S /etc/haproxy/pxc/haproxy-main.sock
│ │ └─48835 haproxy -sf 15 -x sockpair@4 -W -db -f /etc/haproxy-custom/haproxy-global.cfg -f /etc/haproxy/pxc/haproxy.cfg -p /etc/haproxy/pxc/haproxy.pid -S /etc/haproxy/pxc/haproxy-main.sock
│ ├─8db5635748609c63ff9cac6355cf768bd8bf30e293df9177ebaafc6ec568f2b7 
│ │ └─47873 /bin/mysqld_exporter --mysqld.username=monitor --collect.info_schema.processlist
│ ├─acbbde53118ff708c9e897d6f511c58f753f9a1824ae232e8c4160a80376aba6 
│ │ └─49431 /pause
│ ├─fc57cd7c7b57ddd5e5d9d2204189d6ed3ad4f1491481aa12c0aacfa05e08f3ee 
│ │ └─54036 /secretgen-controller
│ ├─e5e99e0fd5b128414f5e6a7691496bcfb0494c5d0bc4ab6fdd26354decff7021 
│ │ └─57834 /pause
│ ├─a1acaa762cc7c27dcb2f8d2aa2f93f788123a18fa532f88bee702973675dd703 
│ │ └─63086 /pause
│ ├─0a4a8cb01e1d798288f67f039e0e1af3b67ca8e5defb31dc4f8b15a39d37d575 
│ │ └─60526 /bin/prometheus-config-reloader --listen-address=:8080 --reload-url=http://127.0.0.1:9093/-/reload --config-file=/etc/alertmanager/config/alertmanager.yaml.gz --config-envsubst-file=/etc/alertmanager/config_out/alertmanager.env.yaml --watched-dir=/etc/alertmanager/config
│ ├─70c75aa1bf458bc35bf3e8cb57c4eceb91d6737ec3d0f8a20ebfb5efe6619751 
│ │ └─41982 /usr/local/bin/envoy-gateway server --config-path=/config/envoy-gateway.yaml
│ ├─538e7b6a3695668dae82e95fd0f972c5983bad41c221bec3a92a1a9674a78412 
│ │ ├─97484 staffeln-conductor: master process [/var/lib/openstack/bin/staffeln-conductor --config-file /etc/staffeln/staffeln.conf]
│ │ ├─97589 staffeln-conductor: Staffeln conductor backup controller worker(0)
│ │ └─97591 staffeln-conductor: Staffeln conductor rotation controller worker(0)
│ ├─63b315ae0ab55e70c23001a8a0ce42da94a629792bfc5f289785746dc94e87ee 
│ │ └─39885 /usr/local/bin/kube-proxy --config=/var/lib/kube-proxy/config.conf --hostname-override=instance
│ ├─3f323201f40f1d72bcafdf4c648b4bab704fdaa23e510cbc7f02ac4b78b21012 
│ │ └─45367 /pause
│ ├─0955574b7f4e59b82859e6ef67e48143aefbf6855516ecb8330e3e0667df307e 
│ │ ├─47760 mysqld --wsrep_start_position=97a1424f-3e68-11f1-8708-0387c8562ca4:20
│ │ └─47852 /var/lib/mysql/mysql-state-monitor
│ ├─3e6e13da859ee58a6a3ff5ede0e165954d6a726dc04ad0c2d49ddc120e49dd48 
│ │ └─43511 /app/cmd/controller/controller --v=2 --cluster-resource-namespace=cert-manager --leader-election-namespace=cert-manager --acme-http01-solver-image=harbor.atmosphere.dev/quay.io/jetstack/cert-manager-acmesolver:v1.12.17 --feature-gates=AdditionalCertificateOutputFormats=true --max-concurrent-challenges=60
│ ├─9dad7ac21d45abf68b453cccee31a52133c88e2bcabaf40978006ec864d2b3b8 
│ │ └─49558 java -Dkc.config.built=true -Xms64m -Xmx512m -XX:MetaspaceSize=96M -XX:MaxMetaspaceSize=256m -Dfile.encoding=UTF-8 -Dsun.stdout.encoding=UTF-8 -Dsun.err.encoding=UTF-8 -Dstdout.encoding=UTF-8 -Dstderr.encoding=UTF-8 -XX:+ExitOnOutOfMemoryError -Djava.security.egd=file:/dev/urandom -XX:+UseParallelGC -XX:MinHeapFreeRatio=10 -XX:MaxHeapFreeRatio=20 -XX:GCTimeRatio=4 -XX:AdaptiveSizePolicyWeight=90 -XX:FlightRecorderOptions=stackdepth=512 --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.base/java.security=ALL-UNNAMED -Djgroups.dns.query=keycloak-headless.auth-system.svc.cluster.local -Dkc.home.dir=/opt/keycloak/bin/.. -Djboss.server.config.dir=/opt/keycloak/bin/../conf -Djava.util.logging.manager=org.jboss.logmanager.LogManager -Dquarkus-log-max-startup-records=10000 -cp /opt/keycloak/bin/../lib/quarkus-run.jar io.quarkus.bootstrap.runner.QuarkusEntryPoint --verbose start --health-enabled=true --http-enabled=true --http-port=8080 --hostname-strict=false --spi-events-listener-jboss-logging-success-level=info --spi-events-listener-jboss-logging-error-level=warn --transaction-xa-enabled=false --metrics-enabled=true
│ ├─e0070de565a1b87af5866096fde870f157caea8a5363c394528dd498073c43f1 
│ │ ├─74053 barbiacan-api: uWSGI master
│ │ └─74066 barbiacan-api: uWSGI worker 1
│ ├─b3b5f1e760552655072f18982c59c0142010474d5acf1b57118b27b7ee974e7a 
│ │ └─40615 /pause
│ ├─620a0dcc15ac92c68b149f0a8347405cc87f3c87c16dfab723981a8b21fe5ff5 
│ │ └─42334 /pause
│ ├─edf7a59f7a04c41e7ea3d9c3d71a774310dccfa4543b28a17c725a156042e639 
│ │ └─46680 /pause
│ ├─116089c606b359e69fef100455eb7174f8b16f36d9f8a5042ed8cbf6c35f11e5 
│ │ └─58782 grafana server --homepath=/usr/share/grafana --config=/etc/grafana/grafana.ini --packaging=docker cfg:default.log.mode=console cfg:default.paths.data=/var/lib/grafana/ cfg:default.paths.logs=/var/log/grafana cfg:default.paths.plugins=/var/lib/grafana/plugins cfg:default.paths.provisioning=/etc/grafana/provisioning
│ ├─c33a972e68d620178a5bf49925e71f8736b46eb61e3f2d87c7f693003f5e4053 
│ │ └─53643 /pause
│ ├─e782a99052fc98d02d5d672f5aabeb34bddb57277f7544b29ece884e3795e169 
│ │ └─58734 /pause
│ ├─a9a9287bdb923c2ae0be527657f28df1e3b8e776e1eb4d25a70602a0dacb91d0 
│ │ └─59737 memcached -m 1024 --extended=modern,track_sizes -I 5m -c 16384 -v -u 11211
│ ├─a16bad40e453eafedb26bf6ee8b3605aecfded22ed0358b8bcb1f732ec4357d2 
│ │ └─79350 /pause
│ ├─061333d7b67efa66ce5e5802a640bd6b8ce894b4163578badf67a2f132fef48a 
│ │ └─60454 /bin/node_exporter --path.procfs=/host/proc --path.sysfs=/host/sys --path.rootfs=/host/root --path.udev.data=/host/root/run/udev/data --web.listen-address=[0.0.0.0]:9100 --collector.diskstats.ignored-devices=^(ram|loop|nbd|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$ --collector.filesystem.fs-types-exclude=^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|fuse.squashfuse_ll|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$ --collector.filesystem.mount-points-exclude=^/(dev|proc|run/credentials/.+|sys|var/lib/docker/.+|var/lib/kubelet/pods/.+|var/lib/kubelet/plugins/kubernetes.io/csi/.+|run/containerd/.+)($|/) --collector.netclass.ignored-devices=^(lxc|cilium_|qbr|qvb|qvo|tap|ovs-system|br|tbr|gre_sys|[0-9a-f]+_eth|vxlan).*$ --collector.netdev.device-exclude=^(lxc|cilium_|qbr|qvb|qvo|tap|ovs-system|br|tbr|gre_sys|[0-9a-f]+_eth|vxlan).*$ --collector.processes --collector.systemd --collector.stat.softirq --web.config.file=/config/node-exporter.yml
│ ├─103d73a0c02dde42aded544ebf70d5a1bb542dab88ca1bf983785ba459dd4a67 
│ │ └─60489 /bin/alertmanager --config.file=/etc/alertmanager/config_out/alertmanager.env.yaml --storage.path=/alertmanager --data.retention=120h --cluster.listen-address= --web.listen-address=:9093 --web.external-url=http://alertmanager.199-19-213-139.nip.io/ --web.route-prefix=/ --cluster.label=monitoring/kube-prometheus-stack-alertmanager --cluster.peer=alertmanager-kube-prometheus-stack-alertmanager-0.alertmanager-operated:9094 --cluster.reconnect-timeout=5m --web.config.file=/etc/alertmanager/web_config/web-config.yaml
│ ├─6d876771513c0888a36f2fe1c40c6c6d8c1d80bb7e8e3f6c85520a0efbb77d3b 
│ │ └─69492 /pause
│ └─f3d6855440ac802ce834ccee46e3d3e01a50e7c14c3817e398522ec800164f1f 
│   └─57991 /pause
├─proc-sys-fs-binfmt_misc.mount 
└─dev-hugepages.mount